Network; Tcp/Ip - Amcrest NVR11H Series User Manual

5.9.2 Network

5.9.2.1 TCP/IP

The TCP/IP interface is shown as in Figure 5-29.
Please refer to the following sheet for detailed information.
Parameter
Mode
Mac Address
IP Version
IP Address
Preferred DNS
Alternate DNS
Figure 5-29
Function
There are two modes: static mode and DHCP mode.

The IP/submask/gateway are null when you select the
DHCP mode to auto obtain an IP.

If you select the static mode, you need to set the
IP/submask/gateway manually.

If you select the DHCP mode, you can view the
IP/submask/gateway from the DHCP.

If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.

IP/submask/gateway and DHCP are read-only when the
PPPoE is used.
This is to display the host Mac address.
This is to select the IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
Please use the keyboard to input the desired IP address and
then set the corresponding subnet mask and default gateway.
DNS IP address.
Alternate DNS IP address.
141