otherwise you cannot see the following interface. While on the main view, left click to show the
navigation bar.
The navigation bar is shown as below. See Figure 4-8.
2
1
4.3.1 Main Menu
Click the
button to go to the Main Menu interface.
4.3.2 Multiview
Click the corresponding button to show the desired channel view.
4.3.3 Tour
Click
to enable the tour. The icon becomes
4.3.4 PTZ
Click
and the system shows the PTZ control interface. Please refer to chapter 4.6.1.
4.3.5 Color
Click
and the system shows the color interface. Please refer to chapter 4.5.4.1.
Please make sure the system is in one-channel mode.
4.3.6 Search
Click
and the system shows the search interface. Please refer to chapter 4.8.2
4.3.7 Alarm Status
Click
and the system shows the alarm status interface. This is to view the device and channel
status. Please refer to chapter 4.14.1.4.
4.3.8 Channel Info
Click
and the system shows the channel information setup interface. This is to view the information
of the corresponding channel. See Figure 4-9.
3
Figure 4-8
4
5
6
and you can see the tour is in process.
7
8
9 10 11 12
20