Schedule; Schedule Record - Amcrest NVR11H Series User Manual

4.7.2 Schedule

The record type priority is: Alarm>Motion detect>Regular.

4.7.2.1 Schedule Record

Set record time, record plan, etc. Please note the system is in 24-hour recording by default after its
first boot up.
In the Main Menu, from Main Menu->Setting->Storage->Schedule, you can go to the schedule menu.
See Figure 4-43.
Channel: Please select the channel number first. You can select "All" if you want to set the same

schedule for all channels.

: Sync connection icon. Select the
together.

: Click this to delete a recording type from one period.

Record Type: Please check the box to select the corresponding recording type. There are four
types: Regular/MD (motion detect)/Alarm/MD&Alarm.

Week day: There are eight options ranging from Saturday to Sunday and all.

Holiday: This is to set a holiday. Please note you need to go to the General interface (Main
Menu->Setting->System->General) to add a holiday first. Otherwise you can not see this item.

Pre-record: The system can pre-record the video before the event occurs into the file. The value
ranges from 1 to 30 seconds depending on the bit stream.

Redundancy: The system supports a redundancy backup function. This allows your backup file to
be recorded to two disks. You can highlight the Redundancy button to activate this function.
Please note, before enabling this function, please set at least one HDD as redundant. (Main
Menu->Setting->Storage->HDD Manager). Please note this function is null if there is only
one HDD.

ANR: This is to save video to the SD card of the network camera in case the network connection
fails. The value ranges from 0s～43200s. After the network connection is resumed, the system
can get the video from the SD card and there is no risk of recording loss.

Period setup: Click the
shown as in Figure 4-44. There are four recording types: regular, motion detection (MD), alarm,
MD & alarm.
Please follow the steps listed below to draw the period manually.
a) Select a channel you want to set. See Figure 4-40.
b) Set recording type. See Figure 4-41.
icon of several days and all synced days can be edited
button after one date or a holiday and you can see an interface
Figure 4-40
Figure 4-41
44