Amcrest NVR11H Series User Manual page 140

Parameter
Preset
Tour
Pattern
Aux
Light and
wiper
3D Intelligent Positioning
Key
You can click this icon to
display or hide the PTZ
control platform.
Function

Select Preset from the dropdown list.

Turn the camera to the corresponding position and input the
preset value. Click the Add button to add a preset.

Select Tour from the dropdown list.

Input preset value in the column. Click the Add preset button and
you have added one preset in the tour.

Repeat the above procedures to add more presets in one tour.

Or you can click the delete preset button to remove one preset
from the tour.

Select Pattern from the dropdown list.

You can input the pattern value and then click the Start button to
begin PTZ movement such as zoom, focus, iris, direction, etc.
Then you can click the Add button to set one pattern.

Please input the corresponding aux value here.

You can select one option and then click the AUX on or AUX off
button.
You can turn on or turn off the light/wiper.
Figure 5-15
130