Account; User Name - Amcrest NVR11H Series User Manual

5.9.5.2 Account

Note:

For the following user name or the user group name, the system supports a max of 6 characters. A
space at the front or at the end of the string is null. A valid string can include: characters, numbers,
and underlines.

The default user amount is 64 and the default group amount is 20. The factory default settings
include two levels: user and admin. You can set the corresponding group and then set the rights for
the respective user in the specified groups.

User management adopts group/user modes. The user name and the group name must be unique. A
user can only be included in one group.

5.9.5.2.1 User name

In this interface you can add/remove users and modify user names. See Figure 5-84.
Add user: This is to add a user to a group and set the user's rights. See Figure 5-85.
There are two default users: admin and the hidden user "default". All users have administrator rights. The
hidden user "default" is for system interior use only and cannot be deleted. When there is no user logged
in, the hidden user "default" automatically logs in. You can set some rights such as monitor for this user so
that you can view some channel views without logging in.
Here you can input the user name and password and then select one group for the current user.
Please note the user's rights should not exceed the group's rights.
Figure 5-83
Figure 5-84
173