Table of Contents
Advertisement
Item
Saturation
Mirror
Flip
3D Denoise
Backlight
Scene Mode
Day Light
4.5.4.2
GUI
From Main Menu->Setting->System->GUI, you can go to the following interface. See Figure 4-24.
Here you can set menu and video preview effects. All your operations here do not affect the recorded file
and playback effect.
Note
not correct. Please note the video may become hazy if the value is
too low. If this value is too high, the dark section may lack
brightness while the bright section may over exposure. The
recommended value ranges from 40 to 60.
This is to adjust monitor window saturation. The value ranges from
0 to 100. The default value is 50.
The larger the number, the strong the color is. This value has no
effect on the general brightness of the whole video. The video color
may become too strong if the value is too high. For the grey part of
the video, the distortion may occur if the white balance is not
accurate. Please note the video may not be attractive if the value
is too low. The recommended value ranges from 40 to 60.
This option reflects the image to switch the left and right sides (as if
looking through a mirror). This is useful when used with Flip to
ensure the view is correct.
This option flips the image upside down. This is often used when
the camera is mounted upside down.
This reduces the noise in the video to enhance the quality.
This is the backlight compensation setting. It has three settings for
a High or bright backlight compensation, Low or moderate
backlight compensation, and Stop for no backlight compensation.
This option adjusts the red and blue gain in the video and has 4
settings: schedule, sunny, night, and customized.
Auto
Automatically switches between black and white and
color depending on how much light is present.
Black/White The device outputs video in black and white.
Colorful
The device outputs video in color.
32
Advertisement
Table of Contents
