Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Channel
Pre-record
Redundancy Check this box here to enable the redundancy function. Please note
Snapshot
Holiday
Setup
Copy
5.9.4.2 Storage Media
5.9.4.2.1
Local Storage
The local storage interface is shown as in Figure 5-75. Here you can see HDD information. You can also
operate the read-only, read-write, redundancy (if there is more than one HDD) and format operations.
5.9.4.2.2
HDD
The HDD interface is to the set HDD group. See Figure 5-76.
Figure 5-74
Function
Please select a channel from the dropdown list.
Please input the pre-record time here. The value ranges from 0 to 30s.
this function is null if there is only one HDD.
Check this box here to enable the snapshot function.
Check this box here to enable the holiday function.
Click the Setup button to set the record period. See Figure 5-73. There
are six periods in one day. If you do not check the day at the bottom of
the interface, the current setup is for today only.
Please click the Save button and then exit.
The copy function allows you to copy one channel's setup to another.
After setting up the channel, click the Copy button to go to interface
Figure 5-74. You can see the current channel name is grey such as
channel 1. Now you can select the channels you want to paste such as
channel 5/6/7. If you want to save current setup of channel 1 to all
channels, you can click the first box "ALL". Click the the OK button to
save current copy setup. Click the OK button on the Encode interface
to finish copying.
Figure 5-75
168
Advertisement
Table of Contents
