Network Load; Hdd Setup; Format - Amcrest NVR11H Series User Manual

Hide thumbs Also See for NVR11H Series:
Table of Contents

Advertisement

4.11.2.2 Network Load

From Main Menu->Info-Network->Load, network load is shown as in Figure 4-106. Here you can view the
following statistics of the device network adapter.
Here you can view information on all connected network adapters. The connection status is shown as
offline if the connection is disconnected. Click one network adapter to view the flow statistics such as
send rate and receive rate on the top panel

4.12 HDD Setup

Here you can view HDD information such as type, status, total capacity, record time, and etc. The
operation includes format, resume from error, and change HDD property (Read write, Read-only). Here
you can also set alarm and HDD storage position.

4.12.1 Format

a)
From Main Menu->Setting->Storage->HDD Manager, you can go to HDD management interface.
See Figure 4-107.
Figure 4-106
100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nvr11h-p series

Table of Contents