Image/Alarm-Out; Image; Alarm Output; Wan Login - Amcrest NVR11H Series User Manual

5.7 Image/Alarm-out

Select one monitor channel video and then click the Image button in section 9. The interface is shown as
Figure 5-16.

5.7.1 Image

Here you can adjust its brightness, contrast, hue, and saturation. (Current channel border becomes
green).
Or you can click the Reset button to restore the system default settings.
Figure 5-16

5.7.2 Alarm output

Here you can enable or disable the alarm signal of the corresponding port. See Figure 5-17.
Figure 5-17

5.8 WAN Login

In WAN mode, after you have logged in, the interface is shown as below. See Figure 5-18.
131