Table of Contents
Advertisement
Parameter
Snapshot type
Image size
Quality
Interval
Copy
5.9.1.3.3 Video Overlay
The video overlay interface is shown as in Figure 5-25.
Please refer to the following sheet for detailed information.
Parameter
Cover-area
Time Title
Channel Title
5.9.1.3.4 Path
Function
There are two modes: Regular (schedule) and Trigger.
Regular snapshot is valid during the specified period you
set.
Trigger snapshot only is valid when a motion detect alarm,
tampering alarm, or local activation alarm occurs.
This is the same with the resolution of the main stream.
This is to set the image quality. There are six levels.
This is to set snapshot frequency. The value ranges from 1s to
7s. Or you can set a customized value. The max setting is
3600s/picture.
This enables you to copy the current channel setup to other
channel(s).
Figure 5-25
Function
Check Preview or Monitor first.
Click the Setup button to create a privacy mask for the specified
video in the preview or monitor video.
System supports a max of 4 privacy mask zones.
You can enable this function so that system overlays time
information in the video window.
You can use the mouse to drag the time title position.
You can view the time title on the live video on the WEB or the
playback video.
You can enable this function so that system overlays channel
information in the video window.
You can use the mouse to drag the channel title position.
You can view the channel title on the live video oo the WEB or
the playback video.
139
Advertisement
Table of Contents
