Table of Contents
Advertisement
Figure 4-102
2) The proxy server software developed from the SDK. Please open the software and input the global
setup. Please make sure the auto connection port here is the same as the port you set in the previous
step.
3) Now you can add a device. Please do not input the default port number such as the TCP port in the
mapping port number. The device ID here should be the same as the ID you input in Figure 4-102. Click
the Add button to complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means your
registration is OK. You can view the proxy server when the device is online.
Important
The server IP address can also be a domain. You need to register a domain name before you run your
proxy device server.
4.11.1.13 Switch
This is for you to set the IP address, subnet mask, gateway, and etc of the Switch. See Figure 4-103.
97
Advertisement
Table of Contents
