Table of Contents
Advertisement
4.4.1 Remote Device Connection
From Main Menu->Setting->Camera or right mouse click on the preview interface and then select
Remote, you can see the following interface. See Figure 4-10.
Figure 4-10
Click the Device Search button, and you can view the searched IP addresses at the top pane of the
interface. Double click an IP address or check one IP address and then click the Add button to add the
current device to the bottom pane of the interface. The system supports batch adding.
Click the Manual Add button to add a device directly. Here you can set TCP/UPD/auto connection mode.
The default setup is TCP. See Figure 4-11.
Important
Please note the manual add function is for Foscam, Dahua, Panasonic, Sony, Dynacolor, Samsung, AXIS,
Arecont, ONVIF, and Custom. When the type is the custom, you can input the URL address, user name,
and password to connect to the network camera without selecting the network camera manufacturer.
Please contact your network camera manufacturer for the URL address.
22
Advertisement
Table of Contents
