Data And Time - Amcrest NVR11H Series User Manual


Startup wizard: Once you check the box here, the system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.

Mouse property: You can set the double click speed via dragging the slide bard. You can click
the Default button to restore default settting.

4.13.2 Data and Time

From Main Menu->Setting->System->General, you can go to the general interface. See Figure 4-115.

System time: Here is where you set system time

Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
 Date separator: There are three denotations to separate the date: ".", "-", and "/".

DST: Here you can set the DST time and date by week or by date. Please enable the DST
function and then select the setup mode. Please input the start time and end time and click the
Save button.

Time format: There are two types: 24-hour mode or 12-hour mode.

NTP: This is to set NTP server, port, and interval.
Note:
Since the system time is very important, do not modify time casually unless there is a reason!
Before you modify the time, please stop recording first!
After completing all the settings please click the save button to back to the previous menu.
Figure 4-114
106