Enter The Quantity; Start The Copy Job - Xerox Phaser 3635MFP/S User Manual

3 Enter the Quantity

4 Start the Copy Job

5 Job Status Screen
Xerox Phaser 3635MFP User Guide
If necessary, press one of the tabs and configure the copy settings. For
information on the individual tabs, refer to the following:
Basic Copying - page 45
Image Quality - page 48
Layout Adjustment - page 50
Output Format- page 54
The maximum copy quantity is 999.
Use the numeric keypad on the control panel to enter the number of copies
required. The number entered is displayed in the upper right-hand corner of
the screen.
NOTE:
To cancel an incorrect entry, press the Clear C button and enter the
correct quantity.
Press the Start button. Each document is scanned only once. The number of
copies requested is displayed in the upper right-hand corner of the screen.
1.
Press the Job Status button on the control panel to display the Job
Status screen.
3 Copy
41