Table of Contents
Advertisement
6 - 44 WiNG 5.7.1 Access Point System Reference Guide
6. Set the following
Enforce Client Load
Balancing
Band Discovery Interval
Capability Ageout Time
7. Set the following
Single Band Clients
Max Probe Requests
Probe Request Interval
Figure 6-21 WLAN - Client Load Balancing screen
Load Balance Settings
generic to both the 2.4 GHz and 5.0 GHz bands:
Select this radio button to enforce a client load balance distribution on this WLAN. This
setting is disabled by default.
Loads are balanced by ignoring association and probe requests. Probes and association
requests are not responded to, forcing a client to associate with another access point.
Define a value in either Seconds (0 - 10,000), Minutes (0 -166) or Hours (0 -2) the access
point uses to discover a client's band capabilities before associating. The default is 10
seconds.
Define a value in either Seconds (0 - 10,000), Minutes (0 -166) or Hours (0 -2) to ageout a
client's capabilities from the access point's internal table. The default is 1 hour.
Load Balancing Settings (2.4
Select this option to enable single band client associations on the 2.4 GHz frequency, even
if load balancing is available. The option is enabled by default.
Enter a value (from 0 - 10,000) for the maximum number of probe requests for client
associations on the 2.4 GHz frequency. The default value is 60.
Enter a value in seconds (from 0 - 10,000) to set an interval for client probe requests,
beyond which association is allowed for clients on the 2.4 GHz frequency. The default
setting is 10 seconds.
GHz):
Hide quick links:
Advertisement
Table of Contents
