Motorola WiNG 5.7.1 System Reference Manual page 608

7 - 30 WiNG 5.7.1 Access Point System Reference Guide
10. Set the Authorization Server Preference
authenticated-server-host. If selecting None, authenticated-server-number, authorized-server-host, or
authorized-server-number, select
Set the following
Server Id
Host
Port
Secret
Request Attempts
Request Timeout
Retry Timeout Factor
11. Click OK to save the changes,
12. Set the Accounting Server Preference
is authenticated-server-host. If selecting None, authenticated-server-number, authorized-server-host, or
authorized-server-number, select
13. Set the following
Server Id
Host
Port
Secret
Request Attempts
to select the server to receive authorization requests. The default is
+ Add Row
Authorization Server Details:
Lists the numerical server index (1-2) for each authentication server when added to the list
available to the controller, service platform or access point.
Displays the IP address or hostname set for the AAA TACACS authentication server. A
valid hostname cannot contain an underscore.
Displays the port the TACACS authentication server listens to traffic. The port range is 1 -
65,535. The default port is 49.
Specify (and confirm) the secret (password) used for authentication between the selected
AAA TACACS server and the controller, service platform or access point. By default the
secret is displayed as asterisks. To see the secret being entered, select the Show option.
Displays the number of connection attempts before the controller, service platform or
access point times out of the authentication session. The available range is from 1 - 10.
The default is 3.
Specify the time for the re-transmission of request packets after an unsuccessful attempt.
The default is 3 seconds. If the set time is exceeded, the authentication session is
terminated.
Set the scaling of retransmission attempts from 50 - 200 seconds. The timeout at each
attempt is the function of the retry timeout factor and the attempt number. 100 (the default
value) implies a constant timeout on each retry. Smaller values indicate more aggressive
(shorter) timeouts. Larger numbers define more conservative (larger) timeouts on each
successive attempt. The default is 100.
Reset to revert to the last saved configuration or
to select the authentication server to receive accounting requests. The default
+ Add Row.
Accounting Server Details:
Lists the numerical server index (1-2) for each authentication server when added to the list
available to the controller, service platform or access point.
Displays the IP address or hostname set for the AAA TACACS authentication server. A
valid hostname cannot contain an underscore.
Displays the port the TACACS authentication server listens to traffic. The port range is 1 -
65,535. The default port is 49.
Specify (and confirm) the secret (password) used for authentication between the selected
AAA TACACS server and the controller, service platform or access point. By default the
secret is displayed as asterisks. To see the secret being entered, select the Show option.
Displays the number of connection attempts before the controller, service platform or
access point times out of the authentication session. The available range is from 1 - 10.
The default is 3.
to populate the table with required parameters.
Exit to close the screen.