Event History Messages - Motorola WiNG 5.7.1 System Reference Manual

14 - 2 WiNG 5.7.1 Access Point System Reference Guide

14.1 Event History Messages

To review event history messages:
1. Select Configuration
2. Select Fetch Historical Events
3. Refer to the following (read only) information to assess logged diagnostic events.
ADOPT-SERVICE SNMP_SUCCESS 6
ADOPT-SERVICE SNMP_FAILURE 6
ADOPT-SERVICE
TUT_TEMPERATURE_ALARM_RAISED ([str])
ADOPT-SERVICE
TUT_TEMPERATURE_ALARM_CLEARED ([str])
ADOPT-SERVICE TUT_TEMPERATURE_ALARM_CLEARED
([str])
ADOPT-SERVICE TUT_FAN_ALARM_CLEARED 5 IPX ([str])
ADOPT-SERVICE TUT_PWRCTRL_ALARM_RAISED 5 IPX
([str])
ADOPT-SERVICE TUT_PWRCTRL_ALARM_CLEARED 5 IPX
([str])
ADOPT-SERVICE TUT_LINE_POWER_ALARM_RAISED 5 IPX
([str]) Line power alarm raised on id [str]
ADOPT-SERVICE TUT_LINE_POWER_ALARM_CLEARED 5
IPX ([str]) Line power alarm cleared on id [str]
ADOPT-SERVICE TUT_WLAN_CLIENT_ASSOC 6 IPX ([str])
Client [str] on interface index [str] associated
ADOPT-SERVICE TUT_WLAN_CLIENT_DISASSOC 6 IPX ([str])
Client [str] on interface index [str] disassociated with status
code [str], [str]
ADOPT-SERVICE TUT_WLAN_CLIENT_ASSOC_FAILURE 3
IPX ([str]) Association failed for Client [str] on interface index
[str] with status code [str], [str]
ADOPT-SERVICE TUT_WLAN_CLIENT_AUTH 6 IPX ([str])
ADOPT-SERVICE TUT_WLAN_CLIENT_DEAUTH 6 IPX ([str])
ADOPT-SERVICE TUT_WLAN_CLIENT_AUTH_FAILURE 3 IPX
([str])
ADOPT-SERVICE TUT_RADIO_ADAPTIVE_POWER_CHANGE
5 IPX ([str])
ADOPT-SERVICE TUT_RF_MONITOR_MODE_CHANGE 5 IPX
([str])
> Diagnostics > Fault Management
to display the diagnostic events in the Event History table.
> Event History to display the Event History screen.
SNMP framework success
SNMP framework failure
Temperature alarm raised on sensor
Temperature alarm cleared on sensor
Temperature alarm cleared on sensor
Fan alarm cleared on ID
Power controller alarm raised
Power controller alarm cleared
Line power alarm raised
Line power alarm cleared
Client associated
Client disassociated
Association failed for client on specified interface index
Client on interface index authenticated
Client on interface index deauthenticated with status code
Authentication failed for client on interface index with status
code
Interface with operational status and power levels
RF monitor status changed to on interface