Table of Contents
Advertisement
Air Termination
Air Termination Channel
Switch
Air Termination Mode
8. Refer to the
Device Categorization
Select the
Add
icon to create a new Device Categorization policy, or select the
Categorization policy.
9. Select
OK
to update the settings. Select
at any point in the configuration process by selecting
access point user interface.
10. Select the
WIPS Events
configuration parameters. This option need to remain selected to apply the WIPS configuration to the access point profile.
The
Excessive
tab displays by default, with additional
The
Excessive
tab lists events with the potential of impacting network performance. An administrator can enable or
disable event filtering and set the thresholds for the generation of the event notification and filtering action.
Select this option to enable the termination of detected rogue AP devices. Air termination
lets you terminate the connection between your wireless LAN and any access point or
client associated with it. If the device is an access point, all clients dis-associated with
the access point. If the device is a client, its connection with the access point is
terminated. This setting is disabled by default.
Select this option to allow neighboring access point to switch channels for rogue AP
termination. This setting is disabled by default.
If termination is enabled, use the drop-down menu to specify the termination mode used
on detected rogue devices. The default setting is manual.
field to associate a Device Categorization Policy with this Wireless IPS policy.
Reset
to revert to the last saved configuration. The WIPS policy can be invoked
tab. Ensure the
Activate Wireless IPS Policy
Figure 8-21 Wireless IPS screen - WIPS Events - Excessive tab
Edit
Activate Wireless IPS Policy
option remains selected to enable the screen's
MU Anomaly
and
AP Anomaly
icon to modify an existing Device
from the upper, left-hand side, of the
tabs also available.
8 - 35
Hide quick links:
Advertisement
Table of Contents
