Table of Contents
Advertisement
Critical resources can be configured for access points and wireless controllers using their respective profiles.
To define critical resources:
1. Select the
Configuration
2. Select Devices.
3. Select
System Profile
from the options on left-hand side of the UI.
4. Select
Critical
Resources.
Figure 5-108 Critical Resources screen - List of Critical Resources tab
The screen lists the destination IP addresses or interfaces (VLAN, WWAN, or PPPoE) used for critical resource connection.
IP addresses can be monitored directly by the access point or controller, whereas a VLAN, WWAN or PPPoE must be
monitored behind an interface.
5. Select the
Add
button at the bottom of the screen to add a new critical resource and connection method, or select and
existing resource and select
tab from the Web UI.
Edit
to update the resource's configuration.
5 - 163
Hide quick links:
Advertisement
Table of Contents
