Motorola WiNG 5.7.1 System Reference Manual page 359

Establishment Criteria
VRRP Group
Critical Resource
17. Define the following Rate Limit
to or received from L2TPv3 tunnel members.
Session Name
Direction
Maximum Burst Size
Rate
Background
Best-effort
Video
Voice
18. Refer to the Peer table
19. Select + Add Row to populate the table with a maximum of two peer configurations.
Specify the establishment criteria for creating a tunnel. The tunnel is only created if this
device is one of the following:
• vrrp-master
• cluster-master
• rf-domain-manager
The tunnel is always created if Always is selected. This indicates that the device need not
be any one of the above three (3) to establish a tunnel.
Set the VRRP group value. This is only applicable if the Establishment Criteria specifies
vrrp-master.
This table lists the critical resources defined for this system. The tunnel is created and
maintained if the critical resources are available. The tunnel is brought down if any one
of the defined critical resource goes down or is unreachable.
settings for the L2TP tunnel configuration. Rate limiting manages the maximum rate sent
Use the drop-down menu to select the tunnel session that will have the direction, burst
size and traffic rate settings applied.
Select the direction for L2TPv3 tunnel traffic rate limiting. Egress traffic is outbound
L2TPv3 tunnel data coming to the controller, service platform or access point. Ingress
traffic is inbound L2TPv3 tunnel data coming to the controller, service platform or access
point.
Set the maximum burst size for egress or ingress traffic rate limiting (depending on which
direction is selected) on a L2TPv3 tunnel. Set a maximum burst size between 2 - 1024
kbytes. The smaller the burst, the less likely the upstream packet transmission will result
in congestion for L2TPv3 tunnel traffic. The default setting is 320 bytes.
Set the data rate (from 50 - 1,000,000 kbps) for egress or ingress traffic rate limiting
(depending on which direction is selected) for an L2TPv3 tunnel. The default setting is
5000 kbps.
Set the random early detection threshold in % for background traffic. Set a value from 1
- 100%. The default is 50%.
Set the random early detection threshold in % for best-effort traffic. Set a value from 1 -
100%. The default is 50%.
Set the random early detection threshold in % for video traffic. Set a value from 1 - 100%.
The default is 25%.
Set the random early detection threshold in % for voice traffic. Set a value from 1 - 100%.
The default is 25%.
to review the configurations of the peers available for tunnel connection.
5 - 275