Motorola WiNG 5.7.1 System Reference Manual page 330

5 - 246 WiNG 5.7.1 Access Point System Reference Guide
42. Refer the following to configure
Key ID
Password
43. Select the OK
Select Reset
5.4.5.3.3 Port Channel Override Configuration
Profile Interface Override Configuration
Access points can have their port channel configurations overridden if a portion of the configuration is no longer relevant to
the access point's deployment objective.
To override a port channel configuration for an access point profile:
1. Select the Configuration
2. Select Devices
3. Select Device Overrides
4. Select a target device from the device browser in the lower, left-hand, side of the UI.
5. Expand the Interface
6. Refer to the following to review existing port channel configurations and their current status:
Name
Type
Description
MD5 Authentication
Set the unique MD5 Authentication key ID. The available key ID range is 1 - 255.
Set the OSPF password. This value is displayed as "asterisk" (*). Select Show to expose the
characters comprising the password.
button located at the bottom right of the screen to save the changes and overrides to the Security screen.
to revert to the last saved configuration.
tab from the Web UI.
from the Configuration tab.
menu and select Port
Figure 5-161 Device Overrides - Port Channels screen
Displays the port channel's numerical identifier assigned to it when it was created. The
numerical name cannot be modified as part of the edit process.
Displays whether the type is port channel.
Lists a a short description (64 characters maximum) describing the port channel or
differentiating it from others with similar configurations.
keys. Select the + Add Row
Channels.
button to add a row to the table.