Table of Contents
Advertisement
12 - 54 WiNG 5.7.1 Access Point System Reference Guide
Hostname
Username/Password
Path
10. Select
OK
to export the trustpoint. Select
11. To optionally delete a trustpoint, select the
the
Delete Trustpoint
trustpoint. Select
12.2.2 RSA Key Management
Certificates
Refer to the RSA Keys screen to review existing RSA key configurations that have been applied to managed devices. If an
existing key does not meet the needs of a pending certificate request, generate a new key or import or export an existing key
to and from a remote location.
Rivest, Shamir, and Adleman (RSA) is an algorithm for public key cryptography. It's an algorithm that can be used for certificate
signing and encryption. When a device trustpoint is created, the RSA key is the private key used with the trustpoint.
To review existing device RSA key configurations, generate additional keys or import/export keys to and from remote locations:
1. Select Operations.
2. Select
Certificates.
3. Select
RSA
Keys.
Provide the hostname or numeric IP4 or IPv6 formatted IP address of the server used to
export the trustpoint. IPV6 provides enhanced identification and location information for
computers on networks routing traffic across the Internet. IPv6 addresses are composed
of eight groups of four hexadecimal digits separated by colons. Providing a host is not
required for cf and usb1-4.
If using Advanced settings, provide the hostname of the server used to export the
trustpoint. This option is not valid for cf and usb1 - 4. A valid hostname cannot contain an
underscore.
These fields are enabled if using ftp or sftp protocols. Specify the username and the
password for that username to access the remote servers using these protocols.
If using Advanced settings, specify the path to the trustpoint. Enter the complete relative
path to the file on the server.
Cancel
Delete
screen and optionally select the
OK
to proceed with the deletion, or
to revert the screen to its last saved configuration.
button from the Trustpoints screen. Provide the trustpoint name within
Delete RSA Key
option to remove the RSA key along with the
Cancel
to revert to the last saved configuration.
Hide quick links:
Advertisement
Table of Contents
