Motorola WiNG 5.7.1 System Reference Manual page 114

5 - 30 WiNG 5.7.1 Access Point System Reference Guide
22. Refer to the MSTP Configuration
Enable as Edge Port
Link Type
Cisco MSTP
Interoperability
Force Protocol Version
Guard
23. Refer to the Spanning Tree Port Cost
Define an Instance Index using the spinner control and then set the cost. The default path cost depends on the user defined
port speed. The cost helps determine the role of the port channel in the MSTP network. The designated cost is the cost for
a packet to travel from this port to the root in the MSTP configuration. The slower the media, the higher the cost.
Speed
<=100000 bits/sec
<=1000000 bits/sec
<=10000000 bits/sec
<=100000000 bits/sec
<=1000000000 bits/sec
<=10000000000 bits/sec
<=100000000000 bits/sec
<=1000000000000 bits/sec
>1000000000000 bits/sec
24. Select + Add Row
25. Refer to the Spanning Tree Port Priority
Define an Instance Index
likelihood of the port becoming a designated port.
26. Select + Add Row
27. Select OK to save the changes made to the Ethernet port's security configuration. Select
configuration.
field to define the following:
Select to enable the port as an Edge Port for MSTP. An Edge Port is a port known to
connect to a LAN which has no other bridges attached to it or is directly connected to
an user device.
Select either the Point-to-Point or Shared radio button. Selecting Point-to-Point
indicates the port should be treated as connected to a point-to-point link. Selecting
Shared means this port should be treated as having a shared connection. A port
connected to a hub is on a shared link, while one connected to a access point is a point-
to-point link. Point-to-Point is the default setting.
Select to enable or disable interoperability with CISCO's implementation of MSTP
which is incompatible with standard MSTP.
Select the STP protocol to use with this port. Select Not Supported to disable STP on
this port.
The Root Guard mechanism prevents election of roots other than those designated as
roots in a network. When this port receives a better BPDU, port state becomes Blocked.
It retains this state till the port no longer receives the better BPDUs and the state is
changed to Forwarding. Select Root to enable this feature. Select None to disable this
feature.
table.
Default Path Cost
200000000
20000000
2000000
200000
20000
2000
200
20
2
as needed to include additional indexes.
table.
using the spinner control and then set the Priority. The lower the priority, the greater the
needed to include additional indexes.
Reset to revert to the last saved