Table of Contents
Advertisement
Key Passphrase
URL
Protocol
Port
Host
Username/Password
Path/File
9. Select
OK
to import the defined RSA key. Select
10. To optionally export a
RSA key
11. Export the key to a RADIUS server so it can be imported without generating a second key. If there are more than one RADIUS
authentication server, export the certificate and do not generate a second key unless you want to deploy two root
certificates.
Define the key used by both the access point and the server (or repository) of the target
RSA key. Select the Show option to expose the actual characters used in the passphrase.
Leaving the Show option unselected displays the passphrase as a series of asterisks "*".
Provide the complete URL to the location of the RSA key. This option is only available
when the Basic link is clicked.
If selecting Advanced, select the protocol used for importing the target key. Available
options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
• usb3
• usb4
If selecting Advanced, use the spinner control to set the port. This option is not valid for
cf, usb1, usb2, usb3 and usb4.
If selecting Advanced, provide the hostname of the server used to import the RSA key.
Select IPv4 Address or IPv6 Address to provide the IP address of a host device
appropriately. This option is not valid for cf, usb1, usb2, usb3 and usb4. A valid hostname
cannot contain an underscore.
These fields are enabled if using ftp or sftp protocols,. Specify the username and the
password for that username to access the remote servers using these protocols.
If selecting Advanced, specify the path to the RSA key. Enter the complete relative path
to the key on the server.
Cancel
to revert the screen to its last saved configuration.
to a remote location, select the
Export
button from the RSA Keys screen.
5 - 207
Hide quick links:
Advertisement
Table of Contents
