Table of Contents
Advertisement
5 - 170 WiNG 5.7.1 Access Point System Reference Guide
Username for SMTP Server
Password for SMTP Server
10. Use the
Persist Configuration Across Reloads
configuration received from its connected Virtual Controller. Stored configurations can be made available to the access
point if the access point's connected Virtual Controller were to be unreachable. Options include Enabled, Disabled and
Secure.
11. Use the
HTTP Analytics
to send the HTTP analytics compressed. Use the
updates to the HTTP analytics server.
12. Select
OK
to save the changes made to the profile's Management Settings. Select
configuration.
13. Select
Firmware
14. Refer to the
Auto Install via DHCP
Enable Configuration Update
Enable Firmware Update
Specify the sender's username on the outgoing SMTP server. Many SMTP servers
require users to authenticate with a username and password before sending E-mail
through the server.
Specify the sender's username password on the outgoing SMTP server. Many SMTP
servers require users to authenticate with a username and password before sending
E-mail through the server.
area to configure how analytics is sent to the HTTP analytics server. Select the
from the Management menu.
Figure 5-113 Profile Management - Firmware screen
field to define the configuration used by the profile to update firmware using DHCP:
Select this option to enable automatic configuration file updates for the profile from
a location external to the access point. If enabled (the setting is disabled by default),
provide a complete path to the target configuration file used in the update. To use this
option, first create a Virtual Interface in the Interfaces section and enable the Use
DHCP to Obtain Gateway/DNS Servers option for that Virtual Interface.
Select this option to enable automatic firmware updates (for this profile) from a
location external to the access point. To use this option, first create a Virtual Interface
in the Interfaces section and enable the Use DHCP to obtain Gateway / DNS Servers
option for that Virtual Interface. This value is disabled by default. For information on
upgrading an AP6532 from firmware version 5.1, refer to
from 5.1 on page
option to define how the access point saves (in flash memory) the
Update Interval
fields to configure the update interval between two
5-171.
Compress
Reset
to revert to the last saved
Upgrading AP6532 Firmware
option
Hide quick links:
Advertisement
Table of Contents
