Table of Contents
Advertisement
Figure 5-156 Virtual Interfaces - Basic Configuration screen - IPv6 tab - Add DHCPv6 Relay
Address
Interface
Select
OK
to save the changes to the DHCPv6 relay configuration. Select
updates.
30. Select the
IPv6 RA Prefixes
Figure 5-157 Device Overrides - Virtual Interfaces - Basic Configuration screen - IPv6 RA Prefixes tab
31. Use the
Router Advertisement Policy
Enter an address for the DHCPv6 relay. These DHCPv6 relay receive messages from DHCPv6
clients and forward them to DHCPv6 servers. The DHCPv6 server sends responses back to the
relay, and the relay then sends these responses to the client on the local network.
Select this option to enable a spinner control to define a VLAN ID from 1 - 4,094 used as the
virtual interface for the DHCPv6 relay. The interface designation is only required for link local
and multicast addresses. A local link address is a locally derived address designed for
addressing on a single link for automatic address configuration, neighbor discovery or when
no routing resources are available.
tab.
drop-down menu to select and apply a policy to the virtual interface.
Exit
to close the screen without saving the
5 - 241
Hide quick links:
Advertisement
Table of Contents
