Motorola WiNG 5.7.1 System Reference Manual page 257

The Mesh Point screen displays a list of configured MeshConnex policies on this device.
5. Refer to the following for more information on the Mesh Point screen:
Mesh Connex Policy
Is Root
Preferred Root
Root Selection Method
Preferred Neighbor
Preferred Interface
Monitor Critical
Resource
Monitor Primary Port
Link
Path Method
6. Select the Add button to create a new Mesh Connex policy.
Figure 5-115 Mesh Point Configuration - Mesh Point screen
Displays the name of the selected Mesh Connex™ policy.
Displays the root status of the mesh point. If the device is a mesh root, then this field displays
"True".
Displays the MAC address of the preferred root. A Preferred Root is a root node that this mesh
point prefers to join over other root nodes in the mesh network.
Displays the root selection method that determines if this meshpoint is a root or not.
Displays the MAC address of the preferred neighbor. A Preferred Neighbor is a node that this
mesh point prefers to have a mesh connection with over other nodes in the mesh network.
Displays the name of the preferred interface. A Preferred Interface is an interface on this mesh
point that is preferred over other interfaces on the device when forming a mesh network.
Displays if this mesh point monitors critical resources for maintaining a mesh connection.
Displays if this mesh point monitors link status on the primary port.
Displays the path selection method used to select the path to the root node.
5 - 173