Table of Contents
Advertisement
5 - 252 WiNG 5.7.1 Access Point System Reference Guide
20. Refer to the
Spanning Tree Port Cost
Define an Instance Index using the spinner control and then set the cost. The default path cost depends on the user defined
port speed. The cost helps determine the role of the port channel in the MSTP network. The designated cost is the cost for
a packet to travel from this port to the root in the MSTP configuration. The slower the media, the higher the cost.
Speed
<=100000 bits/sec
<=1000000 bits/sec
<=10000000 bits/sec
<=100000000 bits/sec
<=1000000000 bits/sec
<=10000000000 bits/sec
<=100000000000 bits/sec
<=1000000000000 bits/sec
>1000000000000 bits/sec
21. Select
+ Add Row
22. Refer to the
Spanning Tree Port Priority
Define an
Instance Index
of the port becoming a designated port.
23. Select
+ Add Row
24. Select
OK
to save the changes made to the Ethernet Port Spanning Tree configuration. Select
saved configuration.
5.4.5.3.4 Radio Override Configuration
Profile Interface Override Configuration
Access points can have their radio profile configurations overridden if a portion of a profile is no longer relevant to the access
point's deployment objective.
To define a radio configuration override for an access point:
1. Select the
Configuration
2. Select Devices from the Configuration tab.
3. Select
Device
4. Select a target access point from the device browser in the lower, left-hand, side of the UI.
5. Select
Interface
6. Select Radios.
table.
Default Path Cost
200000000
20000000
2000000
200000
20000
2000
200
20
2
as needed to include additional indexes.
table.
using the spinner control and then set the Priority. The lower the priority, a greater likelihood
needed to include additional indexes.
tab from the Web UI.
Overrides.
to expand its sub menu options.
Reset
to revert to the last
Hide quick links:
Advertisement
Table of Contents
