Motorola WiNG 5.7.1 System Reference Manual page 601

15. Set the following RADIUS server configuration parameters:
Protocol for MAC,
Captive-Portal
Authentication
Accounting Packet Type
Request Interval
Accounting Server
Preference
Format
Case
Figure 7-14 AAA-Policy - Settings screen
Set the authentication protocol when the server is used for any non-EAP authentication.
Options include Password Authentication Protocol (PAP), Challenge Handshake
Authentication Protocol (CHAP), MSPAP and MSCHAP-V2. The default setting is PAP.
Set the type of RADIUS Accounting Request packets generated. Options include Stop
Only, Start/Stop and Start/Interim/Stop. The default setting is Start/Stop.
Set the periodicity of the interim accounting requests. The default is 30 minutes.
Select the server preference for RADIUS Accounting. The options are:
• Prefer Same Authentication Server Host - Uses the authentication server hostname as
the host used for RADIUS accounting. This is the default setting.
• Prefer Same Authentication Server Index - Uses the same index as the authentication
server for RADIUS accounting.
• Select Accounting Server Independently - Allows users to specify a RADIUS accounting
server separate from the RADIUS authentication server.
Select the format of the MAC address used in the RADIUS accounting packets.
Lists whether the MAC address is sent using uppercase or lowercase letters. The default
setting is uppercase.
7 - 23