Motorola WiNG 5.7.1 System Reference Manual page 1001

1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF Domain, an access point, then
a connected client.
3. Select Traffic.
Traffic Utilization statistics employ an index, which measures how efficiently the traffic medium is used. It is defined as
the percentage of current throughput relative to the maximum possible throughput. This screen also provides the following:
Total Bytes
Total Packets
User Data Rate
Packets per Second
Physical Layer Rate
Bcast/Mcast
Packets
Management
Packets
Tx Dropped Packets
Tx Retries
Rx Errors
Figure 13-113 Wireless Client - Traffic screen
Displays the total bytes processed (in both directions) by the access point's connected client.
Displays the total number of data packets processed (in both directions) by the access point's
connected wireless client.
Displays the average user data rate.
Displays the packets processed per second.
Displays the data rate at the physical layer level.
Displays the total number of broadcast/multicast packets processed by the client.
Displays the number of management (overhead) packets processed by the client.
Displays the client's number of dropped packets while transmitting to its connected access
point.
Displays the total number of client transmit retries with its connected access point.
Displays the errors encountered by the client during data transmission. The higher the error
rate, the less reliable the connection or data transfer between client and connected access
point.
13 - 185