Motorola WiNG 5.7.1 System Reference Manual page 153

6. Set the following parameters to define the ARP configuration:
Switch VLAN Interface
IP Address
MAC Address
Device Type
7. Select the OK button located at the bottom right of the screen to save the changes to the ARP configuration. Select
to revert to the last saved configuration.
Use the spinner control to select a VLAN for an address requiring resolution.
Define the IP address used to fetch a MAC Address.
Displays the target MAC address that's subject to resolution. This is the MAC used for
mapping an IP address to a MAC address that's recognized on the network.
Specify the device type the ARP entry supports (Host, Router or DHCP Server). Host is the
default setting.
5 - 69
Reset