Motorola WiNG 5.7.1 System Reference Manual page 550

6 - 80 WiNG 5.7.1 Access Point System Reference Guide
5. Select the + Add Row
6. If creating a new
The name cannot exceed 32 characters.
7. Set the following parameters for the creation or modification of the Association ACL:
Precedence
Starting MAC Address
Ending MAC Address
Allow/Deny
8. Select the + Add Row
9. Select OK to update the Association ACL settings. Select
Figure 6-35 Association ACL screen
button to add an association ACL template.
Association ACL, provide a name specific to its function. Avoid naming it after a WLAN it may support.
The rules within a WLAN's ACL are applied to packets based on their precedence values.
Every rule has a unique sequential precedence value you define. You cannot add two
rules's with the same precedence value. The default precedence is 1, so be careful to
prioritize ACLs accordingly as they are added.
Provide a starting client MAC address for non unicast and multicast packet transmissions.
Provide an ending MAC address for non unicast and multicast packet transmissions.
Use the drop-down menu to either Allow or Deny access if a MAC address matches this
rule.
radio button to add MAC address ranges and allow/deny designations.
Reset to revert to the last saved configuration.