Table of Contents
Advertisement
46. Select
OK
to save the changes to the IPv6 RA prefix configuration. Select
updates.
47. Select the
OK
button to save the changes and overrides to the basic configuration. Select
configuration.
48. Select the
Security
tab.
49. Use the
IPv4 Inbound Firewall Rules
profile's virtual interface configuration. Select the
Edit
icon to modify an existing configuration.
IPv4 is a connectionless protocol for packet switched networking. IPv4 operates as a best effort delivery method, since it
does not guarantee delivery, and does not ensure proper sequencing or duplicate delivery (unlike (TCP).
IPv4 and IPv6 are different enough to warrant separate protocols. IPv6 devices can alternatively use stateless address
autoconfiguration. IPv4 hosts can use link local addressing to provide local connectivity.
Use the
IPv6 Inbound Firewall Rules
profile's virtual interface configuration. Select the
Edit
icon to modify an existing configuration.
IPv6 is the latest revision of the Internet Protocol (IP) replacing IPv4. IPV6 provides enhanced identification and location
information for systems routing traffic across the Internet. IPv6 addresses are composed of eight groups of four
hexadecimal digits separated by colons.
50. Use the
VPN Crypto Map
Crypto Map entries are sets of configuration parameters for encrypting packets passing through the VPN Tunnel. If a Crypto
Map configuration does not exist suiting the needs of this virtual interface, select the
Map configuration or the
51. Select
OK
to save the changes to the OSPF route security configuration. Select
configuration.
Figure 5-66 Network - OSPF Virtual Interface - Security tab
drop-down menu to select the IPv4 specific inbound firewall rules to apply to this
Create
drop-down menu to select the IPv6 specific inbound firewall rules to apply to this
Create
drop-down menu to select and apply a VPN crypto map entry to apply to the OSPF dynamic route.
Edit
icon to modify an existing configuration.
Exit
to close the screen without saving the
icon to define a new IPv4 firewall rule configuration or select the
icon to define a new IPv6 firewall rule configuration or select the
Reset
Reset
to revert to the last saved
Create
icon to define a new Crypto
to revert to the last saved
5 - 105
Hide quick links:
Advertisement
Table of Contents
