Table of Contents
Advertisement
5 - 4
WiNG 5.7.1 Access Point System Reference Guide
WIPS is not supported on a WLAN basis, rather, sensor functionality is supported on the access point radio(s) available to each
managed WLAN. When an access point radio is functioning as a WIPS sensor, it is able to scan in sensor mode across all legal
channels within the 2.4 and 5.0 GHz band. Sensor functionality is not provided by the access point alone. The access point
works in conjunction with a dedicated WIPS server.
To define a WIPS server configuration used with the access point's RF Domain:
1. Select the
Configuration
2. Select Devices.
3. Select
RF Domains
4. Select the
Sensor Configuration
5. Either select the
Configuration and select the
6. Use the spinner control to assign a numerical
ID is the first reached by the access point. The default ID is 1.
7. Provide the numerical (non DNS)
8. Use the spinner control to specify the
9. Select
OK
to save the changes to the AirDefense WIPS configuration, or select
configuration.
5.1.2 RF Client Name Configuration
The
Client Name Configuration
networked controllers or service platforms. Use the screen to associate administrator assigned client names to specific
connected client MAC addresses for improved client management.
To define a client name configuration used with RF Domain member devices:
1. Select the
Configuration
2. Select Devices.
tab from the Web UI.
from the options on left-hand side of the UI.
tab.
Figure 5-2 RF Domain - Sensor Configuration tab
+ Add Row
button to create a new WIPS server configuration or highlight an existing Sensor Server
Delete
icon to remove it.
IP Address
Port
of each WIPS server. The default port is 443.
screen displays clients connected to RF Domain member access points adopted by
tab from the Web UI.
Server ID
to each WIPS server defined. The server with the lowest defined
of each server used as a WIPS sensor server by the RF Domain.
Reset
to revert to the last saved
Hide quick links:
Advertisement
Table of Contents
