Motorola WiNG 5.7.1 System Reference Manual page 895

The RF Statistics screen lists the following:
Radio Displays the name assigned to the radio as its unique identifier. The name displays in the form
of a link that can be selected to launch a detailed screen containing radio throughout data.
Signal Displays the radio's current power level in - dBm.
SNR Displays the signal to noise ratio of the radio's associated wireless clients.
Tx Physical Layer Displays the data transmit rate for the radio's physical layer. The rate is displayed in Mbps.
Rate
Rx Physical Layer Displays the data receive rate for the radio's physical layer. The rate is displayed in Mbps.
Rate
Avg Retry Number Displays the average number of retries per packet. A high number indicates possible network
or hardware problems. Assess the error rate in respect to potentially high signal and SNR
values to determine whether the error rate coincides with a noisy signal.
Error Rate Displays the total number of received packets which contained errors for the listed radio.
Traffic Index Displays the traffic utilization index of the radio. This is expressed as an integer value. 0 – 20
indicates very low utilization, and 60 and above indicate high utilization.
Quality Index Displays an integer that indicates overall RF performance. The RF quality indices are:
• 0 – 50 (poor)
• 50 – 75 (medium)
• 75 – 100 (good)
Refresh
Select the Refresh button to update the screen's statistics counters to their latest values.
Figure 13-46 Access Point - Radio RF Statistics screen
13 - 79