Motorola WiNG 5.7.1 System Reference Manual page 543

12. Select the Firewall detection traffic Enable (e.g, SIP)
category is detected by the firewall. This option is enabled by default.
13. Select the Implicit TSPEC
platform managed access point before they can transmit or receive data. If enabled, this setting applies to just this radio's
QoS policy. This option is enabled by default.
14. Set the following Voice Access
Enable Voice
Maximum Airtime
Figure 6-32 Radio QoS Policy screen - Admission Control tab
check box to require wireless clients to send their traffic specifications to a controller or service
admission control settings for the radio QoS policy:
Select this check box to enable admission control for voice traffic. Only voice traffic
admission control is enabled, not any of the other access categories (each access category
must be separately enabled and configured). This feature is disabled by default.
Set the maximum airtime (in the form of a percentage of the radio's bandwidth) allotted
to admission control for voice supported client traffic. The available percentage range is
from 0 - 150%, with 150% being available to account for over-subscription. This value
ensures the radio's bandwidth is available for high bandwidth voice traffic (if anticipated
on the wireless medium) or other access category traffic if voice support is not prioritized.
Voice traffic requires longer radio airtime to process, so set a longer airtime value if the
radio is intended to support voice. The default is 75%.
check box to force admission control to traffic whose access
6 - 73