Table of Contents
Advertisement
5. Review the following Bridge NAT configurations to determine whether a new Bridge NAT configuration requires creation
or an existing configuration overridden or removed:
Access List
Interface
NAT Pool
Overload IP
Overload Type
ACL Precedence
6. Select
Add
to create a new Bridge VLAN configuration,
remove a configuration.
Figure 5-231 Profile Override - Security - Bridge NAT screen
Lists the ACL applying IP address access/deny permission rules to the Bridge NAT configuration.
Lists the communication medium (outgoing layer 3 interface) between source and destination
points. This is either the access point's pppoe1 or w wan1 interface or the VLAN used as the
redirection interface between the source and destination.
Lists the names of existing NAT pools used with the Bridge NAT configuration. This displays only
when Overload Type is NAT Pool.
Lists the IP address used to represent a large number local addresses for this configuration.
Lists the overload type used with the listed IP ACL rule. Set as either NAT Pool, One Global
Address or Interface IP Address.
Lists the administrator assigned priority set for the ACL. The lower the value listed, the higher
the priority assigned to this ACL.
Edit
to modify or override an existing configuration or
5 - 345
Delete
to
Hide quick links:
Advertisement
Table of Contents
