Motorola WiNG 5.7.1 System Reference Manual page 730

10 - 6 WiNG 5.7.1 Access Point System Reference Guide
4. Set the following parameters required for
Enable Telnet
Telnet Port
5. Set the following parameters required for
Enable SSHv2
SSHv2 Port
6. Set the following
Enable HTTP
Enable HTTPS
NOTE: If an AP6511 or AP6521's external RADIUS server is not reachable, HTTPS or SSH
management access to the access point may be denied. Those models do not have an
onboard RADIUS resource and are reliant on an external RADIUS resource for
authentication.
7. Set the following
Enable FTP
FTP Username
FTP Password
FTP Root Directory
Telnet
Select the check box to enable Telnet device access. Telnet provides a command line
interface to a remote host over TCP. Telnet provides no encryption, but it does provide
a measure of authentication. Telnet access is disabled by default.
Set the port on which Telnet connections are made (1 - 65,535). The default port is
23. Change this value using the spinner control or by entering the port number in the
field.
SSH
Select the check box to enable SSH device access. SSH (Secure Shell) version 2, like
Telnet, provides a command line interface to a remote host. SSH transmissions are
encrypted and authenticated, increasing the security of transmission. SSH access is
disabled by default.
Set the port on which SSH connections are made. The default port is 22. Change this
value using the spinner control or by entering the port number in the field.
HTTP/HTTPS parameters:
Select the check box to enable HTTP device access. HTTP provides limited
authentication and no encryption.
Select the check box to enable HTTPS device access. HTTPS (Hypertext Transfer
Protocol Secure) is more secure than plain HTTP. HTTPS provides both authentication
and data encryption as opposed to just authentication
FTP parameters:
Select the check box to enable FTP device access. FTP (File Transfer Protocol) is the
standard protocol for transferring files over a TCP/IP network. FTP requires
administrators enter a valid username and password authenticated locally on the
controller. FTP access is disabled by default.
Specify a username required when logging in to the FTP server. The username cannot
exceed 32 characters.
Specify a password required when logging in to the FTP server. Reconfirm the
password in the field provided to ensure it has been entered correctly. The password
cannot exceed 63 characters.
Provide the complete path to the root directory in the space provided. The default
setting has the root directory set to flash:/
access:
access: