Motorola WiNG 5.7.1 System Reference Manual page 442

5 - 358 WiNG 5.7.1 Access Point System Reference Guide
5. Refer to the Message Logging field to define how the profile logs system events. It's important to log individual events to
discern an overall pattern that may be negatively impacting performance.
Enable Message Logging
Remote Logging Host
Facility to Send Log
Messages
Syslog Logging Level
Figure 5-241 Device Overrides - Management Settings screen
Select this option to enable the profile to log system events to a user defined log file
or a syslog server. Selecting this radio button enables the rest of the parameters
required to define the profile's logging configuration. This option is disabled by
default.
Use this table to define numerical (non DNS) IP addresses for up to three external
resources where logged system events can be sent on behalf of the profile. Select
Clear as needed to remove an IP address.
Use the drop-down menu to specify the local server facility (if used) for the profile
event log transfer.
Event severity coincides with the syslog logging level defined for the profile. Assign a
numeric identifier to log events based on criticality. Severity levels include
0 - Emergency, 1 - Alert, 2 - Critical, 3 - Errors, 4 - Warning, 5 - Notice, 6 - Info
and 7 - Debug. The default logging level is 4.