Motorola WiNG 5.7.1 System Reference Manual page 742

11 - 4 WiNG 5.7.1 Access Point System Reference Guide
Module
Message
Severity
Source
Hostname
8. Select Clear All
9. Select Event History
The Event History screen displays events for both wireless controllers and access points. The Controller(s) tab displays by
default. Information on this tab can be filtered by controllers and then further by the RF Domains on the selected controller.
Similarly, the Access Point(s) tab displays information for each RF Domain on the access point and this information can be
further filtered on the devices adopted by this access point.
10. In the Controller(s) tab, select the controller from the
further, select a RF Domain from the
11. In the Access Point(s) tab, select the RF Domain from the
messages further, select a device from the
Displays the module used to track the event. Events detected by other modules are not
tracked.
Displays error or status messages for each event listed.
Displays the severity of the event as defined for tracking from the Configuration screen.
Severity options include:
• All Severities – All events are displayed regardless of their severity
• Critical – Only critical events are displayed
• Error – Only errors are displayed
• Warning – Only warnings are displayed
• Informational – Only informational events are displayed
Displays the MAC address of the source device tracked by the selected module.
Displays the Hostname/IP address of the source device tracked by the selected module.
to clear the events displayed on this screen and begin a new event data collection.
from the upper, left-hand, side of the Fault Management browser.
Figure 11-3 Fault Management - Event History screen
Filter by RF Domain
Filter by Device
Select a Controller field to filter events to display. To filter messages
field.
Select a RF Domain
field.,
field to filter events to display. To filter