Table of Contents
Advertisement
28. Select
Add
to add a new LDAP server configuration,
remove a LDAP server from the list of those available.
29. Set the following
Network
Redundancy
IP Address
Login
Port
Timeout
30. Set the following
Network
Secure Mode
Edit
Figure 9-34 LDAP Server Add screen
address information required for the connection to the external LDAP server resource:
Define whether this LDAP server is a primary or secondary server resource. Primary servers
are always queried for the first connection attempt. However, designating at least one
secondary server is a good practice to ensure RADIUS user information is available if a
primary server were to become unavailable.
Set the IP address of the external LDAP server acting as the data source for the RADIUS server.
Define a unique login name used for accessing the remote LDAP server resource. Consider
using a unique login name for each LDAP server to increase the security of the connection
between the access point and remote LDAP resource.
Use the spinner control to set the physical port used by the RADIUS server to secure a
connection with the remote LDAP server resource. The default port is 389.
Set an interval between 1 - 10 seconds the RADIUS server uses as a wait period for a response
from the target primary or secondary LDAP server resource. The default setting is 10 seconds.
information for the connection to the external LDAP server resource:
Specify the security mode to use when connecting to the external LDAP server. Use start-tls
or tls-mode to connect. The start-tls mode offers a way to upgrade a plain text connection to
an encrypted connection using TLS.
to modify an existing LDAP server configuration or
9 - 53
Delete
to
Hide quick links:
Advertisement
Table of Contents
