Motorola WiNG 5.7.1 System Reference Manual page 138

5 - 54 WiNG 5.7.1 Access Point System Reference Guide
15. Select Create New MeshPoint
16. Select the OK
to revert to the last saved configuration.
17. Select the Legacy Mesh
Use the Legacy Mesh screen to define how mesh connections are established and the number of links available amongst
access points within the Mesh network.
18. Define the following
Mesh
Mesh Links
Mesh PSK
19. Refer to the Preferred Peer Devices
for preferred mesh connection. Use the Priority spinner control to set a priority (1 -6) for connection preference.
20. Select the OK
to revert to the last saved configuration.
21. Select the Advanced Settings
to open a dialog where new mesh points are created.
button located at the bottom right of the screen to save the changes to the WLAN Mapping. Select
tab.
Figure 5-34 Access Point Radio - Mesh Legacy tab
Mesh Settings:
Options include Client, Portal and Disabled. Select Client to scan for mesh portals, or
nodes that have connection to portals, and then connect through them. Portal operation
begins beaconing immediately and accepts connections from other mesh supported
nodes. Select Portal when setting a mesh connection between two Standalone APs. The
default value is Disabled.
Use the spinner control to define the number of mesh links (1 -6) an access point radio will
attempt to create. The default settings is 3 links.
Use the text box to enter the mesh's secret key. Select either ASCII or HEX from the
drop-down menu. Click the Show option to display the secret key entered in the Mesh PSK
field.
table and select
button located at the bottom right of the screen to save the changes to the Mesh configuration. Select
tab.
+ Add Row to define MAC addresses representing peer devices
Reset
Reset