Motorola WiNG 5.7.1 System Reference Manual page 171

5. Set the following MSTP Configuration
MSTP Enable
Max Hop Count
MST Config Name
MST Revision Level
Cisco MSTP
Interoperability
Figure 5-50 Network - Spanning Tree screen
parameters:
Select this option to enable MSTP for this profile. MSTP is disabled by default, so
enable this setting if requiring different (groups) of VLANs with the profile supported
network segment.
Define the maximum number of hops the BPDU considers valid in the spanning tree
topology. The available range is from 7 -127. The default setting is 20.
Define a 64 character maximum name for the MST region to use as an identifier for the
configuration.
Set a numeric revision value ID for MST configuration information. Set a value from
0 - 255. The default setting is 0.
Select either the Enable or Disable radio buttons to enable/disable interoperability with
Cisco's version of MSTP, which is incompatible with standard MSTP. This setting is
disabled by default.
5 - 87