Motorola WiNG 5.7.1 System Reference Manual page 396

5 - 312 WiNG 5.7.1 Access Point System Reference Guide
Video
Voice
14. Set or override the following
Trust ARP Responses
Trust DHCP Responses
Edge VLAN Mode
15. Set the following
IPv6 Firewall
DHCPv6 Trust
RA Guard
16. Refer to the Captive Portal
VLAN configuration.
A captive portal is an access policy for providing temporary and restrictive access using a standard Web browser. Captive
portals provides authenticated access by capturing and re-directing a wireless user's Web browser session to a captive
portal login page where the user must enter valid credentials to access to the network. Once logged into the captive portal,
additional Terms and Agreement, Welcome, Fail and No Service pages provide the administrator with a number of options
on captive portal screen flow and user appearance.
If an existing captive portal does not suite the Bridge VLAN configuration, either select the
configuration or select the
information on configuring a captive portal policy, see
17. Refer to the Captive Portal Snoop IPv6 Subnet
subnet for static wired captive portal clients. Multiple rows can be added to this field.
To add an entry to this field, select the
Exclude IP
Subnet
18. Click the IGMP Snooping
Set the random early detection threshold in % for video traffic. Set a value from 1 - 100%.
The default is 25%.
Set the random early detection threshold in % for voice traffic. Set a value from 1 - 100%.
The default is 25%.
Layer 2 Firewall
Select this option to use trusted ARP packets to update the DHCP snoop table to prevent IP
spoof and arp-cache poisoning attacks. This feature is disabled by default.
Select this option to use DHCP packets from a DHCP server as trusted and permissible
within the network. DHCP packets are used to update the DHCP snoop table to prevent IP
spoof attacks. This feature is disabled by default.
Select this option to enable edge VLAN mode. When selected, the IP address in the VLAN
is not used for normal operations, as it is now designated to isolate devices and prevent
connectivity. This feature is enabled by default.
IPv6 Settings:
Select this option to enable IPv6 on this Bridge VLAN. This setting is enabled by default.
Select this option to enable the trust all DHCPv6 responses on this Bridge VLAN. DHCPv6 is
a networking protocol for configuring IPv6 hosts with IP addresses, IP prefixes or other
configuration attributes required on an IPv6 network. This setting is enabled by default.
Select this option to enable router advertisements or ICMPv6 redirects on this Bridge VLAN.
This setting is enabled by default.
field to select an existing captive portal configuration to apply access restrictions to the Bridge
Create icon to define a new configuration that can be applied to the Bridge VLAN. For
Add Row
Specify the IPv6 address of the wired client to be excluded when snooping an IPv6 subnet
for wired captive portal clients.
Specify the IPv6 subnet on which to scan for wired captive portal clients.
tab to set or override the IGMP snooping configuration.
parameters:
Configuring Captive Portal Policies on page
field to configure the IPv6 clients to be excluded when snooping an IPv6
button below this field
Edit icon to modify an existing
9-2.