Table of Contents
Advertisement
Routing Level
Link Cost
Hello Packet Interval
Adjacency Hold Time
32. Select
OK
to save the updates and overrides to the MINT Protocol configuration. Select
configuration.
33. Select the
Rate Limits
tab.
34. The Rate Limits tab displays the
Best-Effort,
Video
and
rate limiting configuration or Edit to override an existing MINT rate limiting configuration.
Figure 5-255 Device Overrides - Advanced Profile MINT screen - Rate Limits screen
35. Select the Rate Limits tab to display data rate limits configured on extended VLANs and optionally add or edit rate limit
configurations. Excessive traffic can cause performance issues on an extended VLAN. Excessive traffic can be caused by
numerous sources including network loops, faulty devices or malicious software such as a worm or virus that has infected
on one or more devices. Rate limiting reduces the maximum rate sent or received per wireless client. It prevents any single
user from overwhelming the wireless network. It can also provide differential service for service providers. Uplink and
downlink rate limits are usually configured on a RADIUS server using vendor specific attributes. Rate limits are extracted
from the RADIUS server's response. When such attributes are not present, the settings defined on the controller, service
platform or access point are applied. An administrator can set separate QoS rate limit configurations for data types
transmitted from the network (upstream) and data transmitted from a wireless clients back to associated radios
Use the spinner control to define or override a routing level of either 1 or 2.
Use the spinner control to define or override a link cost from 1 - 10,000. The default
value is 10.
Set or override an interval in either Seconds (1 - 120) or Minutes (1 - 2) for the
transmission of hello packets. The default interval is 4 seconds.
Set or override a hold time interval in either Seconds (2 - 600) or Minutes (1 - 10) for
the transmission of hello packets. The default interval is 13 seconds.
Protocol, Level, Link Type,
Voice rate limiting
parameters for each of the configured devices. Select Add to create a new
Reset
VLAN, IP, Port, Rate,
Max Burst
5 - 379
to revert to the last saved
Size, Background,
Hide quick links:
Advertisement
Table of Contents
