Motorola WiNG 5.7.1 System Reference Manual page 733

6. Set the following AAA TACACS configuration parameters
Authentication
Fallback
Accounting
Authorization
Authorization Fallback
7. Configure the AAA TACACS Policy
TACACS policy.
8. Select OK to update the configuration. Select
Select to enable TACACS authentication on login. This option is not available when
the Local field is set to enabled. Also, this option cannot be selected when Fallback
is selected.
Select to enable fallback to use local authentication if TACACS authentication fails.
This option is not available when the Local field is set to enabled. Also, this option
cannot be selected when Authentication is selected.
Select to enable TACACS accounting on login. This option is not available when the
Local field is set to enabled. When selected, the AAA TACACS Policy field is enabled.
Select to enable TACACS authorization on login.
Select to enable fallback on TACACS authorization failure. This option is only
available when Authorization is selected.
to use with this authentication policy. Use the drop-down to select a configured AAA
Reset to revert to the last saved configuration.
10 - 9