Graph - Motorola WiNG 5.7.1 System Reference Manual

13.4.6 Graph

Wireless Client Statistics
Use the client Graph
impact performance. Up to three selected performance variables can be charted at one time. The graph uses a Y-axis and a X-
axis to associate selected parameters with their performance measure.
To view a graph of this client's statistics:
1. Select the Statistics
2. Select System
connected client.
3. Select Graph.
4. Use the Parameters
5. Use the Polling Interval
5 minutes, 20 minutes or 1 hour. 30 seconds is the default value.
Select an available point in the graph to list the selected performance parameter, and display that parameter's value and a
time stamp of when it occurred.
to assess a connected client's radio performance and diagnose performance issues that might negatively
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain, an access point then a
drop down menu to define from 1- 3 variables assessing client signal noise, transmit or receive values.
drop-down menu to define the interval the chart is updated. Options include 30 seconds, 1 minute,
Figure 13-116 Wireless Client - Graph
13 - 189