Table of Contents
Advertisement
Critical Resource
Peer IP Address
Host Name
10. Either select
Add
to create a new L2TPv3 configuration,
a tunnel from those available to this profile.
Figure 5-176 Device Overrides - Network - L2TPv3 screen, Add L2TPv3 Tunnel Configuration
11. If creating a new tunnel configuration, assign it a 31 character maximum Name.
12. Refer to the
Session
table to review the configurations of the peers available for tunnel connection.
13. Select
+ Add Row
to populate the table with configurable session parameters for this tunnel configuration.
14. Define the following
Session
Name
Pseudowire ID
Traffic Source Type
Specifies the critical resource that should exist for a tunnel between two peers to be
created and maintained. Critical resources are device IP addresses or interface
destinations interpreted as critical to the health of the network. Critical resources allow
for the continuous monitoring of these defined addresses. A critical resource, if not
available, can result in the network suffering performance degradation. A critical resource
can be a gateway, AAA server, WAN interface or any hardware or service on which the
stability of the network depends. Critical resources are pinged regularly. If there is a
connectivity issue, an event is generated stating a critical resource is unavailable.
Displays the IP address of the device at the other end of the L2TPv3 tunnel.
Specifies the administrator assigned hostname of the tunnel.
Edit
parameters:
Enter a 31 character maximum session name. There is no idle timeout for a tunnel. A
tunnel is not usable without a session and a subsequent session name.The tunnel is
closed when the last session tunnel session is closed.
Define a psuedowire ID for this session. A pseudowire is an emulation of a layer 2 point-
to-point connection over a packet-switching network (PSN). A pseudowire was developed
out of the necessity to encapsulate and tunnel layer 2 protocols across a layer 3 network.
Lists the type of traffic tunnelled in this session (VLAN etc.).
to modify an existing tunnel configuration or
5 - 273
Delete
to remove
Hide quick links:
Advertisement
Table of Contents
