Wlan Basic Configuration Deployment Considerations - Motorola WiNG 5.7.1 System Reference Manual

7. Refer to the VLAN Assignment
permitted. Remember, users belonging to separate VLANs can share the same WLAN. It's not necessary to create a new
WLAN for every VLAN in the network.
Single VLAN
8. Select Allow RADIUS Override
assigned by a RADIUS Server instead. If, as part of the authentication process, the RADIUS server returns a client's
VLAN ID in a RADIUS Access-Accept packet, and this feature is enabled, all client traffic is forwarded on that VLAN. If
disabled, the RADIUS server returned VLAN ID is ignored and the VLAN configuration (defined in the preceding step) is
used.
9. If RADIUS authentication fails, the VLAN defined is the VLAN assigned to the WLAN.
10. Use the Web Filter
defining URL Filters. Use
To edit an existing URL Filter, use the
11. Select OK when completed to update the WLAN's basic configuration. Select
saved configuration.

6.1.1.1 WLAN Basic Configuration Deployment Considerations

Configuring WLAN Basic Configuration
Before defining a WLAN's basic configuration, refer to the following deployment guidelines to ensure the configuration is
optimally effective:
• Deploy separate VLAN for providing secure WLAN access.
• Define separate VLAN for each WLAN providing guest access.
field to add or remove VLANs for the selected WLAN, and define the number of clients
Select this radio button to assign just one VLAN to this WLAN. Enter the VLAN ID that
displays when the Single VLAN radio button is selected. Utilizing a single VLAN per
WLAN is a more typical deployment scenario than using a VLAN pool.
to allow the access point to override the client VLAN assignment and use the VLAN
field to configure user access restrictions to resources in the Internet. User access is controlled by
User Filter to select a preconfigured URL Filter. To create a new URL Filter, use the
Edit button.
Reset to revert the screen back to the last
6 - 7
Create button.