Club Car 2007 Carryall 295 Maintenance And Service Manual page 532

16
HYDRAULIC ATTACHMENT SYSTEM
Figure 16-57 Rod Seal Tool
7. Install the wiper seal with the lip toward the outside of the head (Figure 16-59, Page 16-34).
8. Install the back-up washer on the head (Figure 16-60, Page 16-34).
Figure 16-59 Install Wiper Seal
9. Install the O-ring next to the back-up ring as shown (Figure 16-61, Page 16-35).
10. If a seal was removed from the head, use the following procedure to install a new seal.
11. Install the guide with a pilot and an adapter, if they are required, on the head (Figure 16-62, Page 16-35).
12. Install the seal on the head using the guide (Figure 16-62, Page 16-35). See following CAUTION.
Page 16-34 2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
Figure 16-58 Install Oil Seal in Head
Figure 16-60 Install Back-up Washer
Cylinders